Phoenix tag tutorial

Phoenix Tag tutorial

by Ladyjai3Creations

May 2024

what you need

paint shop pro (any version, i am using x7)

a tube

i am using Phoenix by ©Kajenna Art

you can purchase this at www.picsfordesign.com

filters

filters unlimited 2.0-distortion filters

AAA frames- foto frame - width 10, opacity 80, all the other settings at defult

eye cand 4000-gradient glow (for the credits & copyright info)

font used for my name- Phoenix Script Upright (i think you can get it at DaFont.com)

okay lets begin

open a transparent image 600 x 250

eye dropper tool, take 2 colors from your tube, if using the phoenix, i took an orange and dark blue 

make a gradient out of those colors

flood fill the background with your gradient

duplicate layer, properties down to 50 or so, merge down

filters unlimited 2.0- distortion filters- surface tension at default

adjust - blur -motion blur -angle 300 strength-100

filters unlimited 2.0- paper textures- striped paper at default

c&p your tube, resize to desired size, place on right side of tag, sharpen

c&p your tube again , background layer, image mirror, resize a bit, bring properties of that down to 35 or so, sharpen

image borders, symetric checked, border width 2, your orange color

borders, symetric checked, border width 1, use your blue color

image borders, symetric checked, border width 2, orange color

AAA frames- foto frame, width 10, opacity 80, all other settings default

image borders, symetric checked, width 2, your blue color

resize it if you wish

add your copyright info, license info and your own taggers watermark, merge all flatten, save as jpg

thats it! you are done! i hope it was easy to follow and you had fun

Phoenix Tag tutorial

by Ladyjai3Creations

May 2024

 

Lavender Coffee tutorial

 

Lavender Coffee tutorial

by Ladyjai3Creations

what you will need

a scrap kit

i am using Lavender Coffee by

Elli's Creations and you can purchase here

https://www.digigraphicdesigns.com/ec-scrapkits-c-1_639_640/lavender-coffee-p-30791.html

it is only $1.50

paint shop pro (any version)

eye candy 4000-gradient glow (credits & license info)

okay lets start

open a 600 x 250 transparent canvas

c&p paper 10 onto canvas

c&p ele 77 resize, place on right side of tag

c&p ele 32 resize , place him on the sidewalk below the stairs

sharpen

bottom layer c&p ele 36, resize by 70% 5 x and place in front yard, sharpen

bottom layer, c&p ele 101 , resize by 70% 6 x and place beside mailbox, sharpen

c&p ele 22 resize by 70% 1 x and place in the middle of the tag 

top layer, c&p ele 19, resize by 70% 3 x place in left bottom corner (add a thin,  purple gradient to the WA)

now take your eye dropper and take a light purple color for foreground, darker for background

image add border symetric checked at 2, use your darker purple

image add borders, symetric checked, at 1 light purple 

image add borders, symetric checked, 2 darker purple 

add your credit info, designer site, your own taggers watermark , merge all flatten, save as jpg 

font i used for my name was Juliet

thats it! you are done, i hope you have enjoyed this tutorial and it was easy to follow

Lavender Coffee by

Ladyjai3Creations

May 2024

Leaf Fall tutorial

 

Leaf Fall tutorial

by Ladyjai3Creations

May 2024

what you need

a tube

i am using Leaf Fall by © Alex Prihodko

you can purchase at PicsforDesign.com

https://picsfordesign.com/catalogue/id_106503_leaf_fall.pix

filters- texture

eye candy 4000- i used the darker color, gradient glow for my name, the copyright info i used white, it shows up better

AAA frames- foto frame (optional)

okay lets begin

open a transparent canvas 600 x 250

take the dropper tool, and make a light color for foreground, darker for background

i used the red in her hair for my colors

now make a gradient from those colors

angle 36 repeats 2

flood fill with your gradient

duplicate that layer 

image mirror, merge down, bring properties of layer down to 50 or so

effects, textures, mosaic antique at default settings

c&p your tube, resize, place on right side of tag, sharpen add DS

c&p your tube on the left side of background layer, bring properties down to 35 or what looks good to you

image add borders, symetric checked, border 2, with your light color

add borders, same settings but with your dark color

again add borders, same setting but with your light color

optional- use AAA frames - foto frame, width 10 opacity 80 all the other settings the same

image add border, 3 symetric checked with your light color

Add your copyright info,license info and your own taggers watermark

merge all flatten, save as jpg

thats it! you are done, i hope you have enjoyed this tutorial and it was easy to follow

Leaf Fall tutorial

by Ladyjai3Creations

May 2024

Coffee or Tea tutorial

 

Coffee or Tea tutorial

by Ladyjai3Creations

May 2024

what you need

a scrap kit- coffee themed

i am using Coffee or Tea by

Designz by Vi

you can purchase this at www.picsfordesign.com

a coffee themed tube

i am using Cocoa by ©  Nocturne

you can also get this at www.picsfordesign.com

paint shop pro (any version)

eye candy 4000-gradient glow (for the copyright info)

okay lets begin

open a transparent image 800 x 800

(we'll crop it down later in the tut)

c&p ele 54 onto your canvase, resize by 80% 1 x

magic wand, click in the squares, after the 1st click hold shift down so all squares are done

c&p paper 3,selections, modify expand by 2,  selections invert, hit delete on keyboard, select none, drag paper under frame

magic wand again and click all the squares , selections expand by 2 , c&p your tube, resize as needed, select none, blend mode luminance legacy, bring layer properties down to 66 or so add a DS of your choice

top layer c&p ele 26 resize as wanted, place on left side of tag, sharpen add DS

c&p ele 48 , resize, place on left side behind the first ele, sharpen add DS

c&p ele 131 , colorize if you want, i did it with a sepia tone, place it under the frame, back to top

c&p ele 43, resize, place in front of coffee grinder, sharpen add DS

c&p ele 17, resize, place on right side of tag, sharpen add DS

c&p ele 15, resize, place in front of to go coffee cup, sharpen add DS

c&p ele 117, resize and place behind the to go cups, sharpen

c&p ele 126 , resize, place behind the to go cups on right side, sharpen add DS

top layer, c&p ele 33, resize, place in front of tag, in the middle, or you can use any of the wordart you would like

sharpen, add DS

you can now crop your tag, merge visible, save as png, then resize your tag to what you like, add your copyright and license info,  designer credits and your own taggers watermark, merge visible

i also used a gradient glow on the license & copyright info and my name too

thats it! i hope you have enjoyed my tutorial and it was easy to follow

Coffee or Tea tutorial

by Ladyjai3Creations

May 2024

At the Coast tutorial

 

At the Coast

by Ladyjai3Creations

May 2024

what you need

paint shop pro (any version)

a tube (any that is a beach theme) 

i am using Cecilia by ©  Alehandra Vanhek

you can purchase this tube here

https://picsfordesign.com/catalogue/id_173966_cecilia.pix

a scrap kit 

i am using At the Coast by Wicked Diabla

you can purchase it at https://www.cdoestore.com/category-s/952.htm?searching=Y&sort=3&cat=952&show=30&page=1&search=%20at%20the%20coast

filters

eye candy 4000- gradient glow for the copyright info

okay lets begin

open a transparent image 800 x 800 (we'll crop it down later)

c&p frame 3 and center in your canvas

get your magic wand mode Add (shift) Match mode RGB value, tolerance 0 contiguous checked, feather 0 anti alias checked  click in middle of frame

selections modify expand by 2 c&p paper 2 selections invert, hit delete on keyboard, select none, drag your paper under frame

c&p your tube, resize to your liking, i resized mine by 69% 2 x then 80% also i added the Captains hat, then sharpen

c&p ele 10 resize by 69% 1 x and place on right side of tag, sharpen add DS  2 -2 68-7

c&p ele 11 resize by 69% 3 x and place in boat, sharpen add DS

c&p ele 28, resize by 69% 4 x and place on bottom of boat, sharpen add DS

c&p ele 34 resize by 69% 5 x and place on top of boat, sharpen add DS

go to frame layer, c&p ele 33 , sharpen

go to top layer c&p wordart beach resize by 69% 2 x sharpen, add DS

you can now crop your tag to whatever size you would like 

add any other elements you like, merge visible, resize to whatever size you want, i always resize mine to 500 width, the heighth autoimatcally resizes

add your copyright info, designer credits, license info, and your own taggers watermark, merge visible, save as png

thats it! i hope you enjoyed my tutorial and it was easy to follow

At the Coast tutorial

by Ladyjai3Creations

May 2024