Lavender Coffee Ashley

 

Lavender Coffee Ashley

by Ladyjai3Creations

September 2024

what you will need

paint shop pro ( i am using version 17)

a scrap kit i am using Lavender Coffee by Elli's Creations

you can pick it up here https://payhip.com/EllisCreationsscraps

a tube 

the kit has lots of tubes in it but i used Ashley by Zlata_M

you can buy it here  https://picsfordesign.com/catalogue/id_151608_ashley.pix

font - Coffee at Midnight (you can get this at DaFont.com)

filters

eye candy 4000-gradient glow (credits)

okay lets begin

open a transparent image 800 x 800

(we'll crop it down later,i just like to have lots of room to work)

c&p ele 12 resize by 70% 1 x

center in image

magic wand , mode add (shift) match mode RGB value tolerance 0 contigious checkedfeather 0 anti alias checked outside

click in center of frame, selections,modify,  expand by 2 c&p ele 7 selections invert delete, select none, drag paper under frame 

top layer, c&p ele 63, place on bottom left hand corner, resize by 70% 2 x sharpen add DS of choice

c&p ele 65, resize by 70% 4 x, sharpen, add DS of choice

c&p ele 99, resize by 70% 3 x (or your preferred size) sharpen add your DS, place behind the coffee beans

go to frame layer, c&p your tube so it looks like shes right on top of frame slightly, sharpen add DS

frame layer, magic wand, c&p your tube close up , selections invert, hit delete on keyboard, select none, 

layer properties soft light, add DS

top layer, c&p ele 89 resize by 70% 2 x place on bottom right side of tag, sharpen, add DS

c&p ele 91, resize by 70% 3 x and place beside coffee pot, sharpen add DS

now you can crop it to any size you like, merge visible, add your credits and license info, copyright info, i usually resize mine to 550 width the height will automatically resize, you can use a thin white gradient on your credits or a white drop shadow to make it more clear. you can also use a thin gradient glow on your name too

merge visible , save as png  

thats it! you are done, i hope you enjoyed this tutorial

Lavender Coffee Ashley

by Ladyjai3Creations

September 2024

Pearl in the Shell snags

 

here are some new snags that go with my tutorial, Pearl in the Shell

tube ©  Alehandra Vanhek

you can purchase this at www.picsfordesigns.com

i hope you enjoy using them

Ladyjai3Creations

June 2024

Blue Jeans Forever tag tutorial

 

Venus in Blue Jeans tag tutorial

by Ladyjai3Creations

June 2024

you will need

paint shop pro (i used 17)

a scrap kit

i am using Venus in Blue Jeans by Elli's Creations

you can purchase this at https://www.digitalgraphicdesigns.com

filters

eye candy 4000- gradient glow (for designer credits & name)

AAA frames- foto frame 

font- i used sloop script three - i got mine at DaFont.com

okay lets start

open a transparent image 400 x 275

resize paper 1 500 x 500

c&p paper 1 onto canvas

c&p ele 84 onto canvas resize by 70% 2 x and place on right side of tag, sharpen add DS (your choice)

background layer c&p ele 34, resize by 70% 3 x and place on sidewalk, sharpen add DS

eye dropper tool, take a dark blue color from your tube, (i used the blue in her shirt)

image add borders, symetric checked, blue, 2 

take a light blue color from your tag, image add borders the same but with the light color

image add borders, symetric checked, dark blue, 3 

AAA frames- foto frame- width 10, opacity 80

image add borders, symetric checked size 3, light blue

add your designer info and your own taggers watermark, you can use a rthin white gradient on the designer info if you wish, merge all flatten, save as jpg

thats it! you are done, i hope you have enjoyed this tutorial

Venus in Blue Jeans tag tutorial

by Ladyjai3Creations

June 2024

Pearl in the Shell tutorial

 

Pearl in the shell tutorial

by Ladyjai3Creations

June 2024

what you will need

paint shop pro (i used 17)

font i used for my name is Seawolf

i also used a small light blue gradient glow on my name too

a tube

i am using an older tube by ©Alehandra Van_Hek

Pearl in the shell available at PicsforDesign.com

i used the blue layers for this, with blonde hair

filters

eye candy 4000- gradient glow (copyright info) 

foto frame -width 10- opacity 80- all other settings on default

filters unlimited 2.0- distortion filters- smelter- default setttings

okay lets start

open a transparent image  400 x 275

eye dropper tool, take a light blue color for foreground, darker blue for background

make a gradient of those colors angle 36 repeats 2, flood fill with the new gradient

layers, duplicate, image mirror, bring properties of layer down to 50

image mirror, merge down

filters unlimited distortion filters- smelter- default setting

c&p your tube, resize as desired, place on right side of tag, sharpen, add DS, V 2 H-2 Opacity 68- Blur 7

go back to your tube, image mirror, c&p tube on the background of your tag, blend mode overlay, bring properties down to 65

top layer,image, add border, symetric checked, 2 use a darker blue for the border

AAA frames, foto frame, width 10, opacity 80, all other settings default

image add borders, light blue color, symetric checked  at 3, 

add your copyright & license info, and your own taggers watermark. save as jpg

you are done! i hope you liked this tutorial and it was easy to follow

Pearl in the Shell tutorial

by Ladyjai3Creations

June 2024

Summer Sun tutorial

 

Summer Sun tutorial

by Ladyjai3Creations

June 2024

what you will need

a scrapkit 

i am using Summer Sun by Elli's Creations

you can purchase it at https://www.digitalgraphicdesigns.com

filters

eye candy 4000- gradient glow (copyright and license info)

Okay lets start

open a transparent image 800 x 800

we will crop this down later in the tutorial

c&p ele 17 resize by 70% 1 x place in center of canvas

magic wand, click in center of frame, selections expand by 2, c&p paper 7, selections invert, delete, select none

drag paper under frame

c&p ele 59, resize to your liking, kind of place her off to side a little, sharpen 

go to top layer

c&p ele 74, resize by 70% 2 x and place on the right bottom of frame

c&p ele 25 resize by 70% 2 x image rotate to right by 20 degrees, place it behind the cluster on right hand side

go to the paper layer, c&p ele 38, resize by 70% 3 x and place on left side of lady behind her

add any other elements you would like

you can now crop your image to whatever size you like, i always like a 500 width

merge visible, resize your image to whatever you like

add your designer credits, copyright info, and your own taggers watermark (you can use a thin white glow on the credits)

merge visible, save as png 

thanks for trying my tutorial, i hope it was easy to follow

Summer Sun tutorial

by Ladyjai3Creations

June 2024

Phoenix tag tutorial

Phoenix Tag tutorial

by Ladyjai3Creations

May 2024

what you need

paint shop pro (any version, i am using x7)

a tube

i am using Phoenix by ©Kajenna Art

you can purchase this at www.picsfordesign.com

filters

filters unlimited 2.0-distortion filters

AAA frames- foto frame - width 10, opacity 80, all the other settings at defult

eye cand 4000-gradient glow (for the credits & copyright info)

font used for my name- Phoenix Script Upright (i think you can get it at DaFont.com)

okay lets begin

open a transparent image 600 x 250

eye dropper tool, take 2 colors from your tube, if using the phoenix, i took an orange and dark blue 

make a gradient out of those colors

flood fill the background with your gradient

duplicate layer, properties down to 50 or so, merge down

filters unlimited 2.0- distortion filters- surface tension at default

adjust - blur -motion blur -angle 300 strength-100

filters unlimited 2.0- paper textures- striped paper at default

c&p your tube, resize to desired size, place on right side of tag, sharpen

c&p your tube again , background layer, image mirror, resize a bit, bring properties of that down to 35 or so, sharpen

image borders, symetric checked, border width 2, your orange color

borders, symetric checked, border width 1, use your blue color

image borders, symetric checked, border width 2, orange color

AAA frames- foto frame, width 10, opacity 80, all other settings default

image borders, symetric checked, width 2, your blue color

resize it if you wish

add your copyright info, license info and your own taggers watermark, merge all flatten, save as jpg

thats it! you are done! i hope it was easy to follow and you had fun

Phoenix Tag tutorial

by Ladyjai3Creations

May 2024

 

Lavender Coffee tutorial

 

Lavender Coffee tutorial

by Ladyjai3Creations

what you will need

a scrap kit

i am using Lavender Coffee by

Elli's Creations and you can purchase here

https://www.digigraphicdesigns.com/ec-scrapkits-c-1_639_640/lavender-coffee-p-30791.html

it is only $1.50

paint shop pro (any version)

eye candy 4000-gradient glow (credits & license info)

okay lets start

open a 600 x 250 transparent canvas

c&p paper 10 onto canvas

c&p ele 77 resize, place on right side of tag

c&p ele 32 resize , place him on the sidewalk below the stairs

sharpen

bottom layer c&p ele 36, resize by 70% 5 x and place in front yard, sharpen

bottom layer, c&p ele 101 , resize by 70% 6 x and place beside mailbox, sharpen

c&p ele 22 resize by 70% 1 x and place in the middle of the tag 

top layer, c&p ele 19, resize by 70% 3 x place in left bottom corner (add a thin,  purple gradient to the WA)

now take your eye dropper and take a light purple color for foreground, darker for background

image add border symetric checked at 2, use your darker purple

image add borders, symetric checked, at 1 light purple 

image add borders, symetric checked, 2 darker purple 

add your credit info, designer site, your own taggers watermark , merge all flatten, save as jpg 

font i used for my name was Juliet

thats it! you are done, i hope you have enjoyed this tutorial and it was easy to follow

Lavender Coffee by

Ladyjai3Creations

May 2024

Leaf Fall tutorial

 

Leaf Fall tutorial

by Ladyjai3Creations

May 2024

what you need

a tube

i am using Leaf Fall by © Alex Prihodko

you can purchase at PicsforDesign.com

https://picsfordesign.com/catalogue/id_106503_leaf_fall.pix

filters- texture

eye candy 4000- i used the darker color, gradient glow for my name, the copyright info i used white, it shows up better

AAA frames- foto frame (optional)

okay lets begin

open a transparent canvas 600 x 250

take the dropper tool, and make a light color for foreground, darker for background

i used the red in her hair for my colors

now make a gradient from those colors

angle 36 repeats 2

flood fill with your gradient

duplicate that layer 

image mirror, merge down, bring properties of layer down to 50 or so

effects, textures, mosaic antique at default settings

c&p your tube, resize, place on right side of tag, sharpen add DS

c&p your tube on the left side of background layer, bring properties down to 35 or what looks good to you

image add borders, symetric checked, border 2, with your light color

add borders, same settings but with your dark color

again add borders, same setting but with your light color

optional- use AAA frames - foto frame, width 10 opacity 80 all the other settings the same

image add border, 3 symetric checked with your light color

Add your copyright info,license info and your own taggers watermark

merge all flatten, save as jpg

thats it! you are done, i hope you have enjoyed this tutorial and it was easy to follow

Leaf Fall tutorial

by Ladyjai3Creations

May 2024

Coffee or Tea tutorial

 

Coffee or Tea tutorial

by Ladyjai3Creations

May 2024

what you need

a scrap kit- coffee themed

i am using Coffee or Tea by

Designz by Vi

you can purchase this at www.picsfordesign.com

a coffee themed tube

i am using Cocoa by ©  Nocturne

you can also get this at www.picsfordesign.com

paint shop pro (any version)

eye candy 4000-gradient glow (for the copyright info)

okay lets begin

open a transparent image 800 x 800

(we'll crop it down later in the tut)

c&p ele 54 onto your canvase, resize by 80% 1 x

magic wand, click in the squares, after the 1st click hold shift down so all squares are done

c&p paper 3,selections, modify expand by 2,  selections invert, hit delete on keyboard, select none, drag paper under frame

magic wand again and click all the squares , selections expand by 2 , c&p your tube, resize as needed, select none, blend mode luminance legacy, bring layer properties down to 66 or so add a DS of your choice

top layer c&p ele 26 resize as wanted, place on left side of tag, sharpen add DS

c&p ele 48 , resize, place on left side behind the first ele, sharpen add DS

c&p ele 131 , colorize if you want, i did it with a sepia tone, place it under the frame, back to top

c&p ele 43, resize, place in front of coffee grinder, sharpen add DS

c&p ele 17, resize, place on right side of tag, sharpen add DS

c&p ele 15, resize, place in front of to go coffee cup, sharpen add DS

c&p ele 117, resize and place behind the to go cups, sharpen

c&p ele 126 , resize, place behind the to go cups on right side, sharpen add DS

top layer, c&p ele 33, resize, place in front of tag, in the middle, or you can use any of the wordart you would like

sharpen, add DS

you can now crop your tag, merge visible, save as png, then resize your tag to what you like, add your copyright and license info,  designer credits and your own taggers watermark, merge visible

i also used a gradient glow on the license & copyright info and my name too

thats it! i hope you have enjoyed my tutorial and it was easy to follow

Coffee or Tea tutorial

by Ladyjai3Creations

May 2024

At the Coast tutorial

 

At the Coast

by Ladyjai3Creations

May 2024

what you need

paint shop pro (any version)

a tube (any that is a beach theme) 

i am using Cecilia by ©  Alehandra Vanhek

you can purchase this tube here

https://picsfordesign.com/catalogue/id_173966_cecilia.pix

a scrap kit 

i am using At the Coast by Wicked Diabla

you can purchase it at https://www.cdoestore.com/category-s/952.htm?searching=Y&sort=3&cat=952&show=30&page=1&search=%20at%20the%20coast

filters

eye candy 4000- gradient glow for the copyright info

okay lets begin

open a transparent image 800 x 800 (we'll crop it down later)

c&p frame 3 and center in your canvas

get your magic wand mode Add (shift) Match mode RGB value, tolerance 0 contiguous checked, feather 0 anti alias checked  click in middle of frame

selections modify expand by 2 c&p paper 2 selections invert, hit delete on keyboard, select none, drag your paper under frame

c&p your tube, resize to your liking, i resized mine by 69% 2 x then 80% also i added the Captains hat, then sharpen

c&p ele 10 resize by 69% 1 x and place on right side of tag, sharpen add DS  2 -2 68-7

c&p ele 11 resize by 69% 3 x and place in boat, sharpen add DS

c&p ele 28, resize by 69% 4 x and place on bottom of boat, sharpen add DS

c&p ele 34 resize by 69% 5 x and place on top of boat, sharpen add DS

go to frame layer, c&p ele 33 , sharpen

go to top layer c&p wordart beach resize by 69% 2 x sharpen, add DS

you can now crop your tag to whatever size you would like 

add any other elements you like, merge visible, resize to whatever size you want, i always resize mine to 500 width, the heighth autoimatcally resizes

add your copyright info, designer credits, license info, and your own taggers watermark, merge visible, save as png

thats it! i hope you enjoyed my tutorial and it was easy to follow

At the Coast tutorial

by Ladyjai3Creations

May 2024

Gradient pixelate tutorial

 

Gradient Pixelate tutorial

by Ladyjai3Creations

April 2024

what you need

a tube

i am using Welcome Spring by ©ChrisPastel

you can get this tube here

www.chrispasteltubes.fr

filters/effects

eye candy 4000- gradient glow (copyright)

effects-distortion effects- pixelate

okay lets begin

open a transparent image 600 x 250

take 2 colors from your tube, light for foreground, darker for background, make a gradient out of those

gradient setting angle 0 repeats 10

effects-distortion effects- pixelate block & height width- 4

c&p your tube, resize to your liking, place on left side of tag, sharpen add DS to your liking

now c&p the tube again or use the close up if you want, image mirror, bring properties of that down to 49 or so

add an image border of about 3 symetric checked using your light color

now if you want use AAA frames, foto frame, width 10 , opacity 80

put your copyright info, license info and your own taggers watermark, merge all flatten, save as jpg

thats it! thanks for trying my tutorial and i hope it was easy to follow

Gradient pixelate tutorial

by Ladyjai3Creations

April 2024

Happy Find extras

 

here are some snags i made from my last tutorial

size is 400 x 275

i hope you enjoy using them

hugs

Happy Find tag tutorial

Happy find tutorial

by Ladyjai3Creations

4 27 2024

what you need

paint shop pro (i used 17 but any will do)

filters

filters unlimited 2.0- special effects 1- shiver

adjust- motion blue- angle 300- strength-100

a tube

i am using Happy Find by ©  Vadis 

you can find this tube at PicsforDesign.com

https://picsfordesign.com/catalogue/id_143813_happy_find.pix

font - sloop script three- you can get this font from DaFont.com

Lets start

open a transparent image 400 x 275

eye dropper tool- pick out 2 colors (i used 2 colors from her dress, i used the green layer)

but you can use any layer you would like

now make a gradient out of those two colors

flood fill your canvas

adjust blur motion blur with the settings from above

filters unlimited 2.0- special effects 1- shiver- repeat 2 more x 

c&p your tube and place on left side of tag, resize by 70% 3 x

now back to your tube , the orginal , image mirror , c&p that tube to your background, bring properties down to about 30-40, sharpen 

top layer- image add borders- 3 symetric checked use the pink color from her flower

merge all flatten, add your copyright info, license info, and your own taggers watermark

merge all flatten again, save as jpg

thats it! you are done, thanks for trying my tutorial. i hope you have enjoyed it and it was easy to follow

Ladyjai3Creations

Happy Find tag tutorial

4/27/24

 

 

Chillin tag tutorial

 

Chillin Tag tutorial

by Ladyjai3Creations

March 23, 2024

what you'll need

paint shop pro ( i am using 17)

a tube

i am using Chillin by ©Nocturne

you can get this at PicsforDesign.com

filters

filters unlimited 2.0 - striped paper fine - (default settings)

if you dont have it then you can just use blinds 

AAA frames-foto frame- width 10 opacity 80

eye candy 4000- gradient glow for copyright info

font used- Silken thread

okay lets start

open a transparent canvas 600 x 250

copy the tube background, paste as new image, resize to 700 width 

image effects seamless tile at default, then 1 more x

new raster layer , fill with a pink color from the tube, 

then filters unlimited, striped paper fine at default, or you can use blinds in texture effects

get the rectangle tool, background off, draw a small square, convert to raster, place in top left corner, magic wand , click in the square, c&p your tube, no resize, move it around to get what  you want, selections invert, press delete on keyboard, select none. pull image under frame, go to top, merge down, duplicate layer, image mirror, place on bottom right of tag

image add border- use a darker pink for the border- symetric checked border width 2

c&p your tube, and put this one in center of tag, resize (i resized mine by 70% 2 x) but you resize to what looks good to you

sharpen, add Drop shadow, V 2 H-2 Opacity 68, blur-7

merge all flatten

AAA frames- foto frame- width 10, opacity 80

then add a light pink border using the same settings

add your copyright info, and your own taggers watermark. merge all flatten, you can also write a type of caption on the left side, if you want.

merge all flatten, save as jpg. 

thats it! you are done, i hope you enjoyed this tutorial and it was easy to follow

thanks for trying my tutorial

Ladyjai3Creations

Chillin tag tutorial

March 23, 2024